- How To Edit Drawings In Photoshop Cs5 Free
- How To Edit Drawings In Photoshop Cs5 File
- Edit Pdf Text In Photoshop
- How To Edit A Picture
How many times have you found yourself trying to choose between two similar photos of your subject where neither photo is perfect? It's a common problem with group shots where in one photo, someone's eyes are closed, and in the other, someone else is looking in the wrong direction.
Wouldn't it be great if, rather than being forced to choose between them, there was an easy way to merge the two images together, keeping only the best elements from each photo, to create that elusive, perfect shot? Fortunately, there is!
In this tutorial, we'll learn how to easily align and composite images in Photoshop. In fact, you may be surprised by just how easy it is to do since we're going to let Photoshop do much of the work for us. First, we'll use a command few people know about to automatically load our photos into the same document and place each one on its own independent layer. Then, we'll align the images using Photoshop's powerful Auto-Align Layers command. Finally, we'll use a layer mask to hide the unwanted areas in one photo and replace them with the better versions from the other photo!
- A basic tutorial because i'm sick of browsing /r/ and seeing shit fakes that look like cake icing on a picture frame.
- I attempted to do as you recommended. I traced over the lines in my simple drawing. They are just Arrow shapes. As you can see, the line is quite jagged. I did as you reccommended and traced over the lines of the arrow, and then in the paths palette area of Photoshop.
- Often in Photoshop CS6, using the Pen tool to get a reasonably decent, but not perfect, path is easier and less time consuming than striving for perfection. After you have that path, go back and edit it for more accuracy using the Path Selection and Direct Selection tools. Photoshop offers editing tools that can make.
I'll be using Photoshop CC (Creative Cloud) here but this tutorial is also fully compatible with Photoshop CS6.
If you want to change the result, it would be a good idea to correct settings in the Layers panel. Initially, Smart Filters appeared as the free Photoshop photo filters in the CS3 version. They give an opportunity to edit any layer non-destructively. I want to say that this type of Photoshop free filtersdoesn't influence the pixels in a layer.
Here's the two photos I'll be working with, taken one sunny afternoon while driving around the countryside. In this first image, I like the horse on the right as it approaches and looks straight into the camera, but the horse on the left is looking down and showing me nothing but the top of its head:
This second photo, taken a few seconds earlier, gives me a better view of the horse on the left, but the horse on the right is further back in the frame and not as interesting as it was in the first shot:
What I'd like to do is combine the best elements from both versions, taking the horse on the right from the first photo and merging it with the horse on the left in the second photo. Here's what the final composite version will look like:
You can use the same steps we're about to learn to align and merge all kinds of images, from family and group shots to animals and pets, landscape and nature photos, or whatever the case may be, so feel free to follow along with your own images. Let's get started!
Step 1: Load Both Images Into The Same Document
Before we can align and merge our photos, we first need a way to get them both into the same document, with each image on its own separate layer. There's actually an easy way to do this, but few people know about it. How do i download photos from android to computer. Simply go up to the File menu in the Menu Bar along the top of the screen, choose Scripts, and then choose Load Files into Stack:
If 'Load Files into Stack' sounds confusing (which it does), think of it instead as 'Load Files into Layers' because that's exactly what the script does; it opens two or more images into the same document and places each image on its own layer. In fact, there's a command in Adobe Bridge named 'Load Files into Photoshop Layers' that does the same thing, but for this tutorial, we'll stick with Photoshop.
Once you've selected the script, Photoshop will pop open the Load Layers dialog box. This is where we tell Photoshop which images to open. Click the Browse button:
Navigate to the folder on your hard drive where the images you want to merge are located. In my case, both of my photos are in a folder on my Desktop. I'll click on the first image to select it, then I'll press and hold my Shift key and click on the second image. This selects both images at once. With both of your photos selected, click the Open button:
You'll see your selected images listed in the center of the Load Layers dialog box. Click OK to load them into Photoshop:
It may take a few moments, but both images will be loaded into the same document, each on its own layer. Since the photos are sitting one above the other, we can only see one of them at a time in the main document area:
If we look in the Layers panel, though, we see that, sure enough, both photos are there. The one on the top layer is the one currently visible in the document, but if you click on its visibility icon to the left of the layer, you'll temporarily turn it off, revealing the other image below it:
With the top layer turned off, the image on the bottom layer is now visible in the document. Click the same visibility icon again to turn the top image back on:
How To Edit Drawings In Photoshop Cs5 Free
Step 2: Select Both Layers
In a moment, we're going to align the images, but to do that, we first need to have both layers selected. Click on the top layer in the Layers panel to select it if it isn't selected already. Then, press and hold your Shift key and click on the bottom layer. This will select both layers at once:
Step 3: Auto-Align The Layers
With both layers selected, go up to the Edit menu at the top of the screen and choose Auto-Align Layers:
This opens the Auto-Align Layers dialog box. Photoshop is quite capable of doing an amazing job when aligning images, so we'll let it do all the work. Leave the Projection option at the top set to Auto (the default setting), then click OK:
Again, it may take a few moments, but when it's done, your photos should be aligned with each other. You can click on each layer's visibility icon in the Layers panel to toggle it on and off and see what changes Photoshop has made to get them aligned. How can i read pdf files on my laptop. I'll click on my bottom layer's visibility icon to turn that layer off temporarily:
This lets me view just the top image, and here we can see that to get both photos aligned, Photoshop resized and rotated the top image. The checkerboard pattern around the image is Photoshop's way of representing transparency:
How to get winrar for free windows 8 1. I'll click the same visibility icon once again to turn the bottom layer back on:
And now, we see just how great of a job Photoshop has done. There is a noticeable horizontal line cutting across the image near the top where the shade of blue in the sky doesn't match between photos, but I'll fix that in a moment. Overall, Photoshop did an amazing job:
Step 4: Select The Top Layer
Now that our images are aligned, we can use a layer mask to hide the unwanted areas in the top image and reveal the better versions from the image underneath. Click on the top layer in the Layers panel to select it, which deselects the bottom layer at the same time:
Step 5: Add A Layer Mask
Click on the Add Layer Mask icon at the bottom of the Layers panel:
Nothing will happen to the image in the main document area, but a white-filled layer mask thumbnail appears on the top layer in the Layers panel. If you want to learn more about how layer masks work, be sure to check out our full Understanding Layer Masks in Photoshop tutorial:
Step 6: Select The Brush Tool
To hide the unwanted areas, we'll need to paint on the layer mask with a brush. For that, we'll need Photoshop's Brush Tool. Select the Brush Tool from the Tools panel along the left of the screen:
How To Edit Drawings In Photoshop Cs5 File
Step 7: Choose A Soft Round Brush
With the Brush Tool selected, click on the Brush Presets icon in the Options Bar along the top of the screen:
This opens Photoshop's Brush Preset Picker. Double-click on the first thumbnail (the one in the top left) to select the soft round brush. Double-clicking both selects the brush and then closes out of the Brush Preset Picker:
Step 8: Set Your Foreground Color To Black
In order to hide areas on the top layer, with need to paint on the layer mask with black. Photoshop uses the Foreground color as the color of the brush, so to quickly set your Foreground color to black, first press the letter D on your keyboard to make sure your Foreground and Background colors are set to their defaults for working with layer masks. This sets your Foreground color to white and your Background color to black. Then, to swap them so your Foreground color is black, press the letter X on your keyboard.
You can see your current Foreground and Background colors in the color swatches near the bottom of the Tools panel. Your Foreground color swatch is the one in the upper left. It should now be filled with black:
Step 9: Paint Over Areas To Hide Them And Reveal The Image Underneath
With a soft round brush in hand and black as the Foreground color, simply paint over any areas in the top image that you want to hide and replace with the same area from the image below it. In my case, I want to replace the horse on the right with the better version of the horse from the other image, so I'll begin painting over the horse. Since I'm painting on the layer mask, not on the image itself, we won't see the black color of my brush strokes. Instead, the top horse begins to disappear in the areas I'm painting over, replaced by the better version of the horse below it. It looks a bit like a science experiment gone wrong at the moment, but it will look better when I'm done:
Helpful Tips
Here's a few handy tips to help you out as you're painting on the mask. To change the size of your brush from the keyboard, press the left bracket key ( [ ) repeatedly to make it smaller or the right bracket key ( ] ) to make it larger. To change the hardness of the brush, press and hold the Shift key while pressing the left bracket key to make the edges softer or the right bracket key to make them harder.
If you make a mistake and paint over an area you didn't mean to, press the letter X on your keyboard to swap your Foreground and Background colors, making your Foreground color white. Paint with white over the mistake to bring back the image on the top layer. Then, press X again to switch your Foreground color back to black and continue painting away other areas.
I'll continue painting over the area until I've completely replaced the horse in the top image with the same horse from the bottom image:
I also want to make sure I swap out the shadow being cast by the horse, so I'll paint over that area as well:
Comparing The Original And Composite Versions
If you want to compare the original and composite versions, you can temporarily turn off the layer mask by pressing and holding your Shift key and clicking on the layer mask thumbnail in the Layers panel. A red 'X' will appear letting you know the mask has been disabled:
This opens the Auto-Align Layers dialog box. Photoshop is quite capable of doing an amazing job when aligning images, so we'll let it do all the work. Leave the Projection option at the top set to Auto (the default setting), then click OK:
Again, it may take a few moments, but when it's done, your photos should be aligned with each other. You can click on each layer's visibility icon in the Layers panel to toggle it on and off and see what changes Photoshop has made to get them aligned. How can i read pdf files on my laptop. I'll click on my bottom layer's visibility icon to turn that layer off temporarily:
This lets me view just the top image, and here we can see that to get both photos aligned, Photoshop resized and rotated the top image. The checkerboard pattern around the image is Photoshop's way of representing transparency:
How to get winrar for free windows 8 1. I'll click the same visibility icon once again to turn the bottom layer back on:
And now, we see just how great of a job Photoshop has done. There is a noticeable horizontal line cutting across the image near the top where the shade of blue in the sky doesn't match between photos, but I'll fix that in a moment. Overall, Photoshop did an amazing job:
Step 4: Select The Top Layer
Now that our images are aligned, we can use a layer mask to hide the unwanted areas in the top image and reveal the better versions from the image underneath. Click on the top layer in the Layers panel to select it, which deselects the bottom layer at the same time:
Step 5: Add A Layer Mask
Click on the Add Layer Mask icon at the bottom of the Layers panel:
Nothing will happen to the image in the main document area, but a white-filled layer mask thumbnail appears on the top layer in the Layers panel. If you want to learn more about how layer masks work, be sure to check out our full Understanding Layer Masks in Photoshop tutorial:
Step 6: Select The Brush Tool
To hide the unwanted areas, we'll need to paint on the layer mask with a brush. For that, we'll need Photoshop's Brush Tool. Select the Brush Tool from the Tools panel along the left of the screen:
How To Edit Drawings In Photoshop Cs5 File
Step 7: Choose A Soft Round Brush
With the Brush Tool selected, click on the Brush Presets icon in the Options Bar along the top of the screen:
This opens Photoshop's Brush Preset Picker. Double-click on the first thumbnail (the one in the top left) to select the soft round brush. Double-clicking both selects the brush and then closes out of the Brush Preset Picker:
Step 8: Set Your Foreground Color To Black
In order to hide areas on the top layer, with need to paint on the layer mask with black. Photoshop uses the Foreground color as the color of the brush, so to quickly set your Foreground color to black, first press the letter D on your keyboard to make sure your Foreground and Background colors are set to their defaults for working with layer masks. This sets your Foreground color to white and your Background color to black. Then, to swap them so your Foreground color is black, press the letter X on your keyboard.
You can see your current Foreground and Background colors in the color swatches near the bottom of the Tools panel. Your Foreground color swatch is the one in the upper left. It should now be filled with black:
Step 9: Paint Over Areas To Hide Them And Reveal The Image Underneath
With a soft round brush in hand and black as the Foreground color, simply paint over any areas in the top image that you want to hide and replace with the same area from the image below it. In my case, I want to replace the horse on the right with the better version of the horse from the other image, so I'll begin painting over the horse. Since I'm painting on the layer mask, not on the image itself, we won't see the black color of my brush strokes. Instead, the top horse begins to disappear in the areas I'm painting over, replaced by the better version of the horse below it. It looks a bit like a science experiment gone wrong at the moment, but it will look better when I'm done:
Helpful Tips
Here's a few handy tips to help you out as you're painting on the mask. To change the size of your brush from the keyboard, press the left bracket key ( [ ) repeatedly to make it smaller or the right bracket key ( ] ) to make it larger. To change the hardness of the brush, press and hold the Shift key while pressing the left bracket key to make the edges softer or the right bracket key to make them harder.
If you make a mistake and paint over an area you didn't mean to, press the letter X on your keyboard to swap your Foreground and Background colors, making your Foreground color white. Paint with white over the mistake to bring back the image on the top layer. Then, press X again to switch your Foreground color back to black and continue painting away other areas.
I'll continue painting over the area until I've completely replaced the horse in the top image with the same horse from the bottom image:
I also want to make sure I swap out the shadow being cast by the horse, so I'll paint over that area as well:
Comparing The Original And Composite Versions
If you want to compare the original and composite versions, you can temporarily turn off the layer mask by pressing and holding your Shift key and clicking on the layer mask thumbnail in the Layers panel. A red 'X' will appear letting you know the mask has been disabled:
With the mask disabled, we see the original, unedited version:
Press and hold Shift and click again on the layer mask thumbnail to turn the mask back on and view the composite version:
To fix that harsh, horizontal line near the top of the image where the shade of blue doesn't match between images, I'll press the right bracket key ( ] ) on my keyboard a few times to make my brush size larger, and with my brush edge still nice and soft, I'll simply paint across that line to create a smooth transition between the photos:
Viewing The Layer Mask In The Document
If you want to view the actual layer mask itself in the document so you can see exactly where you've painted, press and hold the Alt (Win) / Option (Mac) key on your keyboard and click on the layer mask thumbnail in the Layers panel:
This temporarily replaces your image in the document with the layer mask. White represents the areas where the top image remains visible. Areas you've painted over to reveal the image on the bottom layer appear in black. Here, we can see where I've painted over the horse and the sky, and I've also painted along the right edge to smooth out a few more harsh transition edges:
To hide the layer mask and switch back to your image, once again press and hold your Alt (Win) / Option (Mac) key and click on the layer mask thumbnail. And with that, we're done! Here is my final composite of the two original photos:
And there we have it! That's how to easily open, align and merge two images together using the little-known Load Files as Stack command, the powerful Auto-Align Layers command and a simple layer mask in Photoshop! Check out our Photo Retouching section for more Photoshop image editing tutorials!
Edit Pdf Text In Photoshop
Home > Articles > Design > Adobe Photoshop
You can display the whole image in the document window or magnify part of it when you need to work on a small detail. The current zoom level percentage is listed in four locations: on the Application bar, on the document title bar or tab, in the lower left corner of the document window, and on the Navigator panel.
Note: For smoother and more continuous zooming, check Animated Zoom in Edit/Photoshop > Preferences > General, and check Enable OpenGL Drawing in Preferences > Performance. The latter preference must also be checked to use the Scrubby Zoom feature, which is discussed below. For the other Zoom preferences, see page 386.
To change the zoom level using the Zoom tool
- Do any of the following:
- Choose the Zoom tool, then check Scrubby Zoom on the Options bar. In the document window, drag immediately to the right to zoom in A or to the left to zoom out.*
- To spring-load the Zoom tool with its current settings, hold down Z.
- In the Zoom Level field on the Application bar or in the lower left corner of the document window, enter the desired zoom percentage.
- Right-click in the document window and choose a zoom option from the context menu.
- Click a zoom button on the Options bar: Actual Pixels to set the zoom level to 100%; Fit Screen to display the entire image at the largest size that can fit in the window; Fill Screen to have the image fill the window (only part of the image may be visible); or Print Size to display the image at an approximation of its print size.
Using the Navigator panel, you can change the zoom level of an image. And when the zoom level is greater than 100%, you can also use the panel to move the image in the document window, to bring an area you want to edit or examine into view.
To change the zoom level or move the image in the window by using the Navigator panel
- Display the Navigator panel.
- To change the zoom level, do any of the following:
- Ctrl-drag/Cmd-drag across an area of the image thumbnail to marquee it for magnification.
- Type the desired percentage in the zoom field, then press Enter/Return. Or to zoom to a percentage while keeping the field highlighted, press Shift-Enter/Shift-Return.
- Drag the Zoom slider.
- Click the Zoom Out or Zoom In button.
- If the zoom level is above 100%, you can move the image in the window by dragging the view box on the panel.A
Another way to move a magnified image in the document window is by using the Hand tool.
To move a magnified image in the window with the Hand tool
- Choose the Hand tool (H) or hold down the Spacebar for a temporary Hand tool, then drag in the document window.
Note: If the document is in a tabbed window in the Application frame and is magnified, you can overscroll it — that is, drag it farther off to the side than you can in a floating window.
- You can also move a magnified image in the document window by clicking the up or down scroll arrow in the lower right corner of the document window. Or to move the image more quickly, drag the horizontal or vertical scroll bar.
When you have multiple documents open (say, in a 2-Up or 3-Up layout), you can save time by scrolling or zooming all of them simultaneously.
To scroll or zoom in multiple windows
How To Edit A Picture
- Open two or more documents, then on the Arrange Documents menu, click a 2-Up, 3-Up, 4-Up, 5-Up, or 6-Up icon.
- Do either of the following:
- To scroll or zoom all the open Photoshop document windows, hold down Shift while using the Hand or Zoom tool.
- Check Scroll All Windows on the Options bar before using the Hand tool, or check Zoom All Windows on the Options bar before using the Zoom tool.